Advances in Synthesis Gas: Methods, Technologies and Applications,
Edition 1 Syngas Process Modelling and Apparatus SimulationEditors: Edited by Mohammad Reza Rahimpour, Mohammad Amin Makarem and Maryam Meshksar
Conformance
-
PDF/UA-1
-
The publication was certified on 20250710
-
For queries regarding accessibility information, contact [email protected]
Ways Of Reading
-
This e-publication is accessible to the full extent that the file format and types of content allow, on a specific reading device, by default, without necessarily including any additions such as textual descriptions of images or enhanced navigation.
Navigation
-
The contents of the PDF have been tagged to permit access by assistive technologies as per PDF-UA-1 standard.
-
Page breaks included from the original print source
Additional Accessibility Information
-
The language of the text has been specified (e.g., via the HTML or XML lang attribute) to optimise text-to-speech (and other alternative renderings), both at the whole document level and, where appropriate, for individual words, phrases or passages in a different language.
Note
-
This product relies on 3rd party tooling which may impact the accessibility features visible in inspection copies. All accessibility features mentioned would be present in the purchased version of the title.
Advances in Synthesis Gas: Methods, Technologies and Applications: Syngas Process Modelling and Apparatus Simulation consists of numerical modeling and simulation of different processes and apparatus for producing syngas, purifying it as well as synthesizing different chemical materials or generating heat and energy from syngas. These apparatus and processes include, but are not limited to, reforming, gasification, partial oxidation, swing technologies and membranes.
Key Features
- Introduces numerical modeling and the simulation of syngas production processes and apparatus
- Describes numerical models and simulation procedures utilized for syngas purification processes and equipment
- Discusses modelling and simulation of processes using syngas as a source for producing chemicals and power
About the author
Edited by Mohammad Reza Rahimpour, Professor, Department of Chemical Engineering, Shiraz University, Shiraz, Iran; Mohammad Amin Makarem, Research Associate, Methanol Institute, Shiraz University, Shiraz, Iran and Maryam Meshksar, Research Associate, Department of Chemical Engineering, Shiraz University, Shiraz, Iran
Section I: Modelling and Simulation of Syngas Production Processes
1. Thermodynamic and phase equilibrium models of syngas generation through gasification
2. Process Modelling and Apparatus Simulation for Syngas Production
3. simulation of natural gas reformers by computational fluid dynamics
4. Reforming process design and plant modelling: Steam, dry and autothermal reforming
5. Micro-reactors numerical modelling and simulation for syngas production
6. Simulation of biomass to syngas: pyrolysis and gasification processes
Section II: Modelling and Simulation of Syngas Purification Processes
7. Modelling and simulation of membrane assisted separation of CO2 and H2 from syngas
8. Simulation of cyclone separator for particulate removal from syngas
9. Tar and inorganic contaminant removal from syngas: Modelling and simulation
10. Modelling, analysis and simulation of cryogenic distillation processes for syngas purification: Tray and packed columns
11. Purification of syngas from mathematical modelling viewpoints
Section III: Modelling and Simulation of Processes using Syngas
12. Numerical modelling, simulation and optimization of methane production process from syngas
13. Ammonia production from syngas: Plant design and simulation
14. Alcohols synthesis using syngas: Plant design and simulation
15. Modelling, simulation and optimization of combined heat and power generation from produced syngas
16. Study of syngas powered fuel cell simulation, modelling and optimization